Installation Instructions
2 |
P a g e v 2 . 1 ( 1 2 / 2 0 1 9 )
Installation Directions
Remove all packaging material from the product and be careful not to throw away accessories that may be hidden
within the packaging material. If assembly is required, place the luminaire on a smooth non-scratch surface.
INSTALLING THE GROUND LIGHT WITH SPRINGS (refer to diagram below)
1.
Ensure power to the circuit you are working on has been switched OFF, before commencing the installation.
2.
Take the luminaire out from the moulded box.
3.
Remove the lamp shade from luminaire by turning it anti-clockwise. (Fig. 1)
4.
Install the spring onto the luminaire and re-install the lamp shade onto the luminaire. (Fig. 2 & 3)
5.
Cut an installation hole of Ø72mm into the mounting point. (Fig. 4)
6.
Connect the luminaire to the Lucci wiring kit (SKU# 220826, 220827 - sold separately). Ensure the connector is fully
tightened. (Fig. 5)
NOTE: The wiring kit is rated for Max. 80VA load only.
7.
Connect the Lucci wiring kit (SKU# 220826, 220827 – sold separately) to the Lucci transformer (SKU# 220818,
220818, 220829 – sold separately). (Fig. 5)
NOTE: Do not exceed the load of the Lucci wiring kit and Lucci
transformer which are rated 80VA, 28VA and 10VA load respectively.
8.
Press the springs and install the luminaire into the installation hole. (Fig. 5 & 6)
9.
Insert the transformer plug (not included) into mains power socket outlet (not included) and ensure it is fully plugged
in. Switch on the luminaire to test all the lighting functions and enjoy your new luminaire. (Fig. 5 & 6).
