Installation Instructions
2 |
P a g e
v 1 . 0 ( 1 0 / 2 0 1 9 )
Installation Directions
1. Remove all packaging material from the product and be careful not to throw away accessories that may be hidden
within the packaging material.
2. Attach the spike to the bottom of the bollard by twisting it clockwise. (Fig. 1)
3. Loosen the nut at the top and side to remove the shade bracket and glass. (Fig. 2)
4. Install a globe (not included) into the lamp holder. Do not exceed the maximum wattage rating. Do not touch the
globe with bare hands, use clean gloves or tissue. Using bare hands may reduce the life of the globe. (Fig. 3).
5. Install the glass, shade bracket, shade, washer and nuts back onto the bollard (Fig. 3).
6. Select a suitable location for installation, see the installation requirements on page 1. (Fig. 4)
Ensure there is adequate space for the luminaire and wiring.
USING LUCCI WIRING KIT AND LUCCI TRANSFORMER (both sold separately)
7. Remove the cover from the connector on the wiring kit (SKU# 220826, 220827
– sold separately).
Connect the luminaire to the wiring kit.
NOTE: The wiring kit is rated for a 80VA load only.
(Fig. 5)
8. Connect the Lucci wiring kit (SKU# 220826, 220827
– sold separately) to the Lucci transformer (SKU# 220818,
220819, 220829
– sold separately).
NOTE: Do not exceed the load of the Lucci wiring kit and Lucci
transformer which are rated 80VA, 28VA and 10VA load respectively.
(Fig. 5)
USING OTHER WIRING AND TRANSFORMER (not included)
7. Remove the 12V bi-pin connector from the cable for hard wiring or alternative wiring method and power supply
system.
8. Ensure that the wires are secure and no bare wires are exposed. Ensure all wiring and the transformer used are
appropriately rated and suitable for the location used. If unsure please contact a licensed electrician.
9. Turn ON the power to the luminaire. (Fig. 6)
