7
Attach the hook cover plate
.
Thread
the
bobbin
thread
Thread the upper thread before threading the bobbin thread
.
You will not be able to bring up the bobbin
thread unless you have already threaded the upper thread
.
1
2
3
4
5
6
Rotate the hand wheel toward you
(
counterclockwise
)
to raise the needle to its
highest position
.
Lift the presser foot lifter
.
Push the hook cover plate release button
Pull out about 10 cm of thread from the bobbin
and insert the bobbin so it winds to the right
.
Hold the end of the upper thread and rotate the
hand wheel toward you
(
counterclockwise
)
while
pulling on the upper thread until the bobbin
thread emerges from the bobbin thread hole
.
Pull the bobbin thread when it emerges from
the bobbin thread hole
.
It
'
s easier to pull the
thread out if you use a rod with a small tip
.
Pass the upper and bobbin threads to the rear
under the presser foot
,
pulling them out together
about 10 cm
.
See the instructions on the next page for winding thread onto an empty bobbin
.
Note
The
upper
and
bobbin
thread
must
be
correctly
installed
.
Sew
a
test
piece
to
make
sure
the
machine
is
sewing
correctly
and
then
begin
sewing
your
project
.
Be sure to use metal bobbins
.
Caution
Upper
thread
Bobbin
thread
gently
Replacing the needle and thread
to remove it
.
11
