background image

AHE00046EN 2002

17

Alfa LU-VE is a trademark registered and owned by LU-VE Group. 

Alfa LU-VE reserves the right to change specifications without prior notification. 

6  Maintenance

Ensure complete electrical isolation before performing any maintenance activity and always follow 

guidelines and instructions as given in the air cooler product manual AHE00042.

6.1  Fan replacement

Unscrew fixing bolts and remove old fan. Mount 

new fan in identical position. Use an anti-corro-

sion compound when remounting the fixing bolts.

Restore electric connection when the new fan 

has been mounted.

6.2  Driptray

Driptrays can be opened for inspection, cleaning 

and maintenance purposes. To open the drip-

trays, the central connecting driptray needs to be 

removed first. Disconnect drain line and remove 

central driptray.  

Not too tight!

When (re)mounting the primary driptrays, the 

hinge fasteners should NOT be fully tightened, 

to allow the driptray hinges to function properly.

To open both primary driptrays, first loosen and 

remove fixing bolts and then lower the driptrays. 

Respect the maximum opening angle (90°) to 

avoid damage to the driptray hinges.

Содержание ALFA Optigo CD





















Отзывы: