LU-VE Alfa LU-VE AlfaBlue Junior AG, Инструкция по эксплуатации

Страница: 18 / 24

AHE00060EN 2010
18
Alfa LU-VE is a trademark registered and owned by LU-VE Group.
Alfa LU-VE reserves the right to change specifications without prior notification.
5.4 Expansion joints
Alfa LU-VE recommends the installation of
expansion joints on both inlet and outlet con-
nections. Expansion joints are elastic elements
which, if properly installed, absorb the thermal
expansions of the tubing. Expansion joints are
also helpful in order to reduce vibrations in the
piping.
Picture shows an installation example using
threaded bar, nut, grower washer, washer and
locknut (not supplied).
This way vibration dampers can be used to
make the cooler level adjusting the locknut. This
is particularly useful with long units or irregular
basement.
5.5 Switch on/off (option SW)
If switch on/off (SW) is selected, the default positioning is for horizontal airflow installation.
The cover design is such that it can be used both for horizontal and vertical airflow installation.
To adjust the switch positioning to the actual positioning on site: unscrew the cover fixing screws,
turn it as shown and replace fixing screws.
2xM6