LTV LTV-ICDM2-723L-F4, Руководство пользователя

Страница: 26 / 28

26
4. In the Firmware Update section, browse to the desired firmware file on your
computer. Click OK.
NOTE:
Do not disconnect power to the unit during the upgrade. The unit will restart
automaticallyafter the upgrade has completed. (1~5 minutes)
4. If you suspect the firmware upgrade for the camera has failed, always wait at least
5-10 minutesbefore restarting the upgrade process.
5. ITX reserves the right to charge for any camera repair which can be attributed to
faulty upgradingby the user. Always read the upgrade instructions and firmware
release notes before updating thefirmware.
System Reset (Factory Default Reset)
There are two ways to reset the camera back to factory default.holding down about
10-20 sec the reset button on the Network cable
Using the web browser:
1. Go to SETUP > System > Maintenance.
2. Click Factory Default Button and wait 1 minute for camera to reboot.
Using the Reset Button:
1. Holding down 10-20 sec the reset button on the Network cable.
2. Release your finger on the reset button, waiting about 1 minute for camera reboot
NOTE:
The unit will now have the default IP address from a DHCP server.
Use the
‘ADMIN Tool’ to discover and connect to the camera.