User Manual of the PTZKB835 Keyboard
17
The parameters include the protocol, baud rate, data bit, stop bit, and parity.
4.
When the LED screen shows
COPYALL
, you can choose
YES
or
NO
.
When you choose
YES
, the parameters you just set will be copied to other dome cameras connected.
5.
Press
Enter
button to confirm your settings.
6.
Turn the key to the
OPERATE
item to control the dome camera.
Dome Camera Control Operation
The keyboard mainly controls the PTZ function of the dome camera. The PTZ function of the dome camera is realized by the
compound operation of the joystick and the PTZ buttons.
To call the preset, switch to the
OPERATE
mode, press PTZ button to enter PTZ control mode and press the numeric
button and then press the preset button.
Note:
Call preset No. 95 to open the menu of the dome camera.
To call patrol, switch to the
OPERATE
mode, press the numeric button and then press the patrol button;
To call pattern, switch to the
OPERATE
mode, press the numeric button and then press the pattern button.
To set preset, patrol and pattern for the dome camera, you turn the key to the
PROGRAM
mode
Figure 3-8 Turn the Key to PROGRAM
Setting the preset
Press the numeric button and then press the preset button.
And the LED screen returns PRESET DONE, indicating that the preset is set.
Setting the patrol:
Note:
the patrol is a group of presets.
Steps:
1.
In the
PROGRAM
mode. Press the numeric button and press the
PATROL
button.
And then you can see the LED screen shows
PATROL SET.
2.
Press numeric button and press
Enter
button to choose the preset for the patrol.
3.
Press the numeric button again and press
Enter
button again to set the patrol time.
4.
Press the numeric button and press
Enter
button to set the patrol speed.
5.
Press the
PATROL
button to finish the setting.
And the LED screen returns
PATROL DONE
, indicating that the patrol is set.
Setting the pattern:
Steps:
1.
Switch to the
PROGRAM
mode.
2.
Press the numeric button and press the pattern button.
3.
Use the joystick and
ZOOM+/-
button to control the PTZ and record the PTZ movement.
4.
Press the
PATTERN
button again to set the pattern.
