User manual of POE-SW401/POE-SW801
13
Step 2:
Drill two 6mm diameter holes, about 110mm (POE-SW801) away apart on the same level in the wall.
(93mm for POE-SW401)
Figure 2.2 Drill holes in the wall
Step 3:
Insert the expansion screw tubes completely into the holes in the wall with rubber hammer.
Step 4
:
Tighten the expansion tubes and screws with Phillips screwdriver. In order to mount the switch to the wall
firmly, the distance between the screw head and the tube head must be kept at least 2.5mm wide.
Figure 2.3 Tighten the expansion tubes
Step 5:
Place the switch onto the mounting screws, and slide it down until it locks in place.
Figure 2.4 Hang the switch against the wall
Содержание POE-SW401
Страница 1: ...POE SW401 POE SW801 User Manual...