LTS LTPTZIP762X20IR, Руководство по установке

Страница: 9 / 34

Installation Manual of IR High-Definition Network Speed Dome
8
Figure 1-5 Pendent Adapter
4. Install the speed dome to the mount.
1) Hang the safety rope to the speed dome and the hook on the mount as shown in Figure
1-6.
2) Route the cables of the speed dome through the wall mount.
3) Connect the corresponding cables. For the detailed information, please refer to section
1.1.2 Connecting the Cables .
Figure 1-6 Install the Speed Dome
4) Loosen the two lock screws on the wall mount.
5) Install the speed dome to the mount. Rotate the speed dome clockwise tightly.
6) Secure the two lock screws with the Allen wrench as shown in Figure 1-7.
Safety Rope
Pendent
adapter