disassemble the camera for repair or maintenance by
yourself.
2.1
Installation of Type I Camera
2.1.1
Ceiling Mounting without Junction Box
Before you start:
Both wall mounting and ceiling mounting are suitable
for the bullet camera. Ceiling mounting will be taken as
an example in this section. And you can take steps of
ceiling mounting as a reference for wall mounting.
Steps:
1.
Paste the drill template (supplied) to the place
where you want to install the camera.
2.
Drill the screw holes and the cable hole (optional) in
the ceiling according to the drill template.
Figure 2-1
Drill Template
Note:
Drill the cable hole, when adopting ceiling outlet to
route the cable.
3.
Route the cables through the cable hole, or the side
opening.
4.
Fix the camera to the ceiling with supplied screws.
Figure 2-2
Fix the Camera to the Ceiling
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement wall, expansion bolts are required to fix
the camera. For wooden wall, self-tapping screws are
required.
5.
Connect the corresponding power cord, and video
cable.
6.
Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the surveillance angle.
0° to 90°
0° to 360°
0° to 360°
1
2
3
Figure 2-3
3-axis Adjustment