LTO RADIUS 100 Скачать руководство пользователя страница 4

 

 

 

 

Important Safety Precautions 

 

Please note: 

Alto Professional and inMusic are not responsible for the use of its products or 

the misuse of this information for any purpose. Alto Professional and inMusic are not 
responsible for the misuse of its products caused by avoiding compliance with inspection and 
maintenance procedures. Please also refer to the included safety and warranty manual for 
more information. 

 
 

Cables 

 

Make sure your cables are out of the way of performers, production crew, and audience so 
they will not trip over them. 

 
 

Sound Level 

 

Permanent hearing loss may be caused by exposure to extremely high noise levels. The U.S. 
Occupational Safety and Health Administration (OSHA) has specified permissible exposures to 
certain noise levels. According to OSHA, exposure to high sound pressure levels (SPL) in 
excess of these limits may result in hearing loss. When using equipment capable of generating 
high SPL, use hearing protection while such equipment is under operation. 

 

Hours per day  SPL (dB) 

Example 

8 90 

Small 

gig 

6 92 

Train 

4 95 

Subway 

train 

97 

High level desktop monitors

2 100 

Classical 

music 

concert 

1.5 102 

Riveting 

machine 

1 105 

Machine 

factory 

0.50 110 

Airport 

0.25 or less 

115 

Rock concert 

Содержание RADIUS 100












Отзывы: