Installation Instructions
1.
Remove the packaging taking special care with the
doors and separate shelves. Open the cabinet doors
and remove the screws on the doors. Take care not to
lose the screws.
2.
Using a level, mark off a horizontal line, and ensure
that the ends of the brackets are spaced to the width
between the inner edges of the vertical aluminium
extrusions (see illustration 1). Mark off the holes using a pencil.
3.
Note: Screws supplied are only suitable for stud
walls. For drywall walls use special wall fasteners,
available from DIY or hardware stores. Seek advice from
a specialist about the suitability of screws to be used.
Drill the required holes and insert wall screws.
4.
Screw the
bracket to
the wall using the
screws provided.
Please ensure the
screws are fully tight
but take care not to
overtighten.
5.
Before making
any electrical con-
nections it is necessary to turn off the main electricity sup-
ply. This unit is provided with a supply cable already fit-
ted. This cable should be fitted to the household lighting
circuit or to a fused 3 AMP supply. Connections should
be made in accordance with the latest regulations. This
cabinet is manufactured to CLASS 1 and requires an
earth connection.
Example 2
Illustration 1
Example 2
C
D
E
Release Leve
Magnet
Storage
Bar
E
E
F
G
Release Lever
Magnet
Storage
Bar
C
Example
OPERATING INSTRUCTIONS
Lighting is turned on / off by touch sensor switch of mirror
Chandel
LED ILLUMINATED MIRROR
125 Rt. 61 Schuylkill Haven, PA 17972
1-800-360-1585 • fax 570-385-5475 • [email protected]
www.ltlhomeproducts.com
