The Menu
Pushing the MENU button, when you have the LCD screen connected and the camera switched ON,
will take you into the built in Menu. You can use the UP & DOWN arrow buttons to move up and
down through the menu options and you can use the left and right arrow buttons to scroll through
the various different settings available for each selected menu option.
If you change a setting remember to push the OK button to save the change!
The following are the menu options available:
Mode
: Camera, Video or Cam+Video
Choose Camera to record images only, Video for videos only or Cam+Video for an image then a
video.
Format
: will erase everything on the micro SD card.
Photo Size
: choose the quality of the image the camera will record, options are 3,8,14 or 30MP.
Video Size
: choose the video quality the camera will record, options are VGA, 720P or 1080P.
Set Clock
: set date and time plus the date format using the up/down arrow keys to change the
number and the right/left arrow keys to move to the next parameter.
Picture No.
: if you have the camera set to record images you can choose whether you want a single
image or a burst of 2 or 3 images.
Video Length
: set the length of video that's recorded each time the camera is triggered from 0-60
seconds, remember the longer the video recording the more battery life will be used (especially if
recording in dark or low light periods as the infrared is the most power hungry component).
Interval
: choose how long the camera will wait between triggers before it will start recording again.
Sense Level
: set the trigger sensitivity level, options are Off, Low, Normal, High. You can find out
more about the sensitivity levels later in these instruction sheets under the heading “Heat Sensors”.
Time Stamp
: choose On or Off dependent upon whether you want the date & time showing on
each recording or not.
Timer 1 & Timer 2
: these Timers allow you to set the camera to only record between certain times
of day. For instance you may want the camera to record only between 6pm and 4am. Use the
left/right arrow keys to change the setting from Off to On and then push the OK button. Now you
can enter the start and stop recording times of your choice. You can choose to use just one or both
of the Timers.
Password Set
: choose between having to enter a 4 digit password when the LCD screen comes on
or not. If you choose to set a password do not lose it! We can reset it but you'll need to send your
camera back to us and there is a £20 charge for this.
Serial No.
: this is a number or name for your camera and, if set, will show in the information bar at
the bottom of each recorded image.
Содержание Mini30
Страница 6: ......
