Set Clock
Enter
Press
Enter
to set up date and time.
Internal capacitor will remain the clock
time for up to 7 minutes when changing
batteries.
Picture No.
(affects
still photos only)
01 Photo
, 02 Photos,
03 Photos
Select the number of photos taken in
sequence per burst in Camera mode.
Video Length
(affects
video clips only)
Avi 10 s
, optional from
1s to 60s
Videos are in AVI format that can be
played back on most media players.
Interval
1 Min
, optional from
1S to 60M
Select the length of time that the camera
will wait from when the last picture was
taken and written on the SD card, until it
responds to any new triggers. During the
selected interval, the camera will not
take pictures/videos. This prevents the
SD card from filling up with too many
redundant images.
Sense Level
Normal
, High, Low
Select the sensitivity of the PIR sensor.
The High setting suits indoors and
environments with little interference,
while the Normal/Low suits outdoors
and environments with more
interference. Temperature also affects
the sensitivity. The High setting is
suitable when the ambient temperature is
warm, and the Low setting is helpful in
cold weather.
Time Stamp
(affects
still photos only)
On
, Off
Select
On
if you want the date & time
imprinted in every photo.
Timer
Off
, On
Select
On
if you only want the camera to
work within a specified period every
day. For instance, if the starting time is
set at 18:35 and the ending time at 8:25,
the camera will function from 18:35 the
current day to 8:25 the next day. Outside
the time period the camera will not be
triggered nor take photos/videos. This
feature can be used together with
Time
Lapse
feature.
Password Set
Off
, On
Set up a password to protect your camera
from unauthorized users.
Serial No.
Off
, On
Select
On
to assign a serial number to
each camera you have. You can use the
combination of 4 digits and/or alphabets
to record the location in the photos (e.g.