Ltl Acorn Ltl-5511 Series, Руководство пользователя, Страница: 10 / 44

LTL A
CORN®
7
• Press the key to set the camera to shoot video clips.
• Press the key to set the camera to take pictures.
• Press the SHOT key to manually trigger the shutte r . A photo or video (depending
on the camera setting) will be taken and saved to the SD card. If the display shows
“C ARD P ROTECTE D” when you press the SHOT k ey , switch the power OFF, remove
the SD card and slide its write-protect switch to OFF.
• Press the
REPLAY key to review/playback photos/videos on the TF T screen,
or a connected TV monito r . Use and key to navigate.Use and key to zoom
in and out the pictures.Under zoom in,short press to move picture rightwards, long
press to move picture upwards, short press to move leftwards, long press to
move downwards.
There is another key MENU , on the keypad that allows you to program the camera to work
the way you want. Please refer to 3.1 Parameter Settings in Advanced Operation section.
Under the test mode, one useful function you would like is testing the work area of the
perform the test:
• First strap the camera on a tree to aiming the region of interest (ROI).
•
W alk slowly from one side of the ROI to the other parallel to the camera. T ry
different distances and angles from the camera.
and blue ,it indicates the position you located is detected by overlapping area of left
and right PIR sensors, it is the region where camera is ready to shoot.
it is recommended to place the camera 3 to 6 feet (1 to 2 meters) above the ground.
2.4 Enter Test Mode
Switch to the TEST position to enter the T est mode. In this mode you can take pictures or
video clips like a regular digital camera, or enter the Menu to set up parameters. On the
keypad there are four “shortcut” functional keys (see Figure 2-3) working as below:
Figure 2-3