- 5 -
GETTING STARTED
2.1 Load Batteries
Open the bottom cover by pulling down the lock hole.
Follow direction of the arrow, push and release the battery door.
Install 4 AA batteries or 8 AA batteries in the camera (batteries must be leaned to one
side without empty in the middle). Make sure the polarity matches the sign on the cover.
Push to close the battery door.
Alternatively the camera can run on an external 6V~12V DC power source (optional). When
both external power and batteries are connected, the camera will be powered by the external one,
and choose it as preferred power source. Connected to Ltl-SUN Solar Panel (optional), the
camera can work in the field over one year without changing batteries.
When battery level gets low, the message “Low Battery” would be shown on the screen in the
TEST mode. For Ltl-3310A, you can view the message on the TFT LCD display.
2.2 Insert SD Card and Format It
The camera does not come with internal memory. It will not work without a SD (Secure Digital)
memory card or SDHC (High Capacity) card. Before inserting the SD card into the card slot,
please make sure the write-protect switch on the side of the SD card is “off” side (NOT in the
“Lock” position). The supported memory capacity is up to 16GB. If you use a SD card which
capacity is larger than 16GB, please make sure that you test it in advance.
LTL
ACORN
®