LAL 1474
Assembly Instructions
Form. LT013 – rev. 00 - 06/06/2017
page
3
of
3
07 - Attach the Plastic Lens by hands and your
fixture is assembled.
Here again you will install two lenses 4 FT to make the 8 FT
fixture.
C
ONTINUOUS
R
UN
You can connect more than one fixture making a continuous line of LAL 1474 fixture. You should use the
Joiner (part number 2380 17) to connect the fixture. In this case you have to screw the joiner and connect
the second fixture before the step number 06.
Open the knockout at the headboard of
the fixture to pass the cable. Make the
connections AC and dimming and use
four nuts per union to attach the joiner
to the headboard of the device by
joining the two pieces.
