5. Wiring Diagram:
3
5.1
ne
O
sending end
,
multiple receiving ends:
6. Attention:
7. Warranty Agreement:
6.1 The product shall be installed and serviced by the qualified person.
6.2 This product is non-waterproof. Please avoid the sun and rain. When installed outdoors please ensure
it is mounted in a water proof enclosure.
6.3 Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.
6.4 Please check if the output voltage of the LED power supply used comply with the working voltage
of the product.
6.5 Please ensure that adequate sized cable is used from the controller to the LED lights to carry the
current. Please also ensure that the cable is secured tightly in the connector.
6.6 Ensure all wire connections and polarities are correct before applying power to avoid any damages
to the LED lights.
6.7 If a fault occurs please return the product to your supplier. Do not attempt to fix this product by
yourself.
★
This manual only applies to this model. LTECH reserves the right to make changes without prior notice.
7.1 We provide lifelong technical assistance with this product:
●
A 5-year warranty is given from the date of purchase. The warranty is for free repair or replacement if
cover manufacturing faults only.
●
For faults beyond the 5-year warranty we reserve the right to charge for time and parts.
7.2 Warranty exclusions below:
●
Any man-made damages caused from improper operation, or connecting to excess voltage and
overloading.
●
The product appears to have excessive physical damage.
●
Damage due to natural disasters and force majeure.
●
Warranty label, fragile label and unique barcode label have been damaged.
●
The product has been replaced by a brand new product.
7.3 Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
LTECH shall not be liable for any incidental or consequential damages for breach of any stipulation
in this warranty.
7.4 Any amendment or adjustment to this warranty must be approved in writing by LTECH only.
4
Receiving
end
Please install the
booster antenna
in high open place.
the communication
distance can up to
1000-2000 meters
generally.
Booster Antenna
Booster Antenna
Booster Antenna
5.3
Extend the communication distance by boost antenna:
Sending
end
DMX512 Console
【
Attn
】
Receiving
end
LED Lights
LED Lights
LT
-
870S
LT
-
870S
LT
-
870S
LT
-
870S
LT
-
870S
LT
-
870S
LT
-
870S
LT
-
870S
LT
-
870S
LT-870S Wireless DMX512 Transceiver
LT-870S Wireless DMX512 Transceiver
2.4G Wireless
transmission
DMX signal cable
Variety of DMX Devices
LED Lights
LED Lights
LED Lights
Console signal cable
connected to wireless
DMX transceiver
Variety of DMX Devices
Variety of DMX Devices
Moving Head Lights
DMX512 Console
DMX512 Console
Remote synchronization
control the city lights.
Relay
5.2
Relay way to extend the communication distance:
Relay Point
Frequency
Point B
Receiving
end
Sending end
LT
-
870S
LT-870S
LT-870S
Update Time: 2016.10.18
