4. Conjunction Diagram:
+
-
Switch changing modes
by pressing
key.
+
-
M
3.2 Self-testing Scene Mode.
3.3 Restore the Default Parameter:
Restore the default parameter, digital tube display "RES".
Default Parameters: DMX decoder mode, DMX base address is 1, Gamma curve,
self-testing in No.1 pattern status.
Long press “M” key to enter self-testing scene mode.
Series 1-12pcs LED × 3CH
3
If the recoil effect occurs because of longer signal line or bad line quality, please try to connect 0.25W
90-120Ω terminal resistor at the end of each line.
An amplifier is needed when more than 32 decoders are connected, signal amplification should not be
more than 5 times continuously.
4
Update Time: 2017.12.19_A1
5.1 The product shall be installed and serviced by the qualified person.
6.4 Any amendment or adjustment to this warranty must be approved in writing by our company only.
6.3 Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
We shall not be liable for any incidental or consequential damages for breach of any stipulation in
this warranty.
6.1 We provide lifelong technical assistance with this product:
For faults beyond the 5-year warranty, we reserve the right to charge for time and parts.
A 5-year warranty is given from the date of purchase. The warranty is for free repair or replacement
if cover manufacturing faults only.
The product appears to have excessive physical damage.
Damage due to natural disasters and force majeure.
Warranty label, fragile label and unique barcode label have been damaged.
The product has been replaced by a brand new product.
6.2 Warranty exclusions below:
Any man-made damages caused from improper operation, or connecting to excess voltage and
overloading.
5.6 If a fault occurs, please return the product to your supplier. Do not attempt to fix this product by
yourself.
5.5 Ensure all wire connections and polarities are correct before applying power to avoid any damages to
the LED lights.
5.5 Please ensure that adequate sized cable is used from the controller to the LED lights to carry the
current. Please also ensure that the cable is secured tightly in the connector.
5.4 Please check if the output voltage of the LED power supplies used comply with the working voltage of
the product.
5.3 Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.
5.2 This product is non-waterproof. Please avoid the sun and rain. When installed outdoors, please
ensure it is mounted in a water proof enclosure.
5. Attention:
6. Warranty Agreement:
★
This manual only applies to this model. We reserve the right to make changes without prior notice.
DIN-DMX-350 CC DMX/RDM Decoder
DIN-DMX-350 CC DMX/RDM Decoder
*
*
NO.
MODE
P-1
P-2
P-3
P-4
P-5
P-6
P-7
P-8
P-9
1
2
3
4
5
6
7
8
9
Digital Tube Display
(press +/- to switch)
Long press keys at the same time,
Static Red
Static Green
Static Blue
Static Yellow
Static Purple
Static Cyan
Static White
7 Color Jumping
7 Color Smooth