Ltech ArtNet-SPI-1, Быстрый старт

Страница: 3 / 4

ArtNet-SPI-1 ArtNet-SPI Converter ArtNet-SPI-1 ArtNet-SPI Converter
5 6
6. Connect ArtNet-SPI-1 to the computer
6.2 Use the equipped adapter to power ArtNet-SPI-1.
6.3 Connect ArtNet-SPI-1 and computer via the cable.
6.1 Install the Madrix 3 software in the computer, the icon on the desktop :
MADRIX 3
6
.
4 IP setting: this control system is compatible with random network segment. According to the ArtNet
protocol, 2.X.X.X can be added in the computer ( X means arbitrary value), methods as below:
This product is compatible with all the ArtNet software in the market, here take MADRIX as an example:
6.4.1 Open the Network, click
“Properties” button of the
TCP/IPv4 protocol.
6.4.4 Add the IP address 2.X.X.X
(X could be arbitrary value).
6.4.5 Interface of adding successful,
click “ OK ” and exit.
6.4.2 Click “ Advanced”. 6.4.3 Click “ Add”.
5. Conjunction diagram
www.ltech-led.com
Computer
ArtNet-SPI-1
Cable
ArtNet-SPI-1
ArtNet-SPI-1
Cable
Cable
CAT5
CAT5
CAT5
Switch
CAT5
ArtNet-SPI-1
Cable
CAT5
ArtNet-SPI-1
Cable
CAT5