This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions : (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTE: Any changes or modifications not expressly approved by
the manufacturer could inhibit the user's ability to
operate the equipment and void the warranty.
To comply with the FCC RF exposure compliance requirements,
this device and its antenna must not be co-located or operating
to conjunction with any other antenna or transmitter.
7
Transmission Mode : Operating at 2.4GHz ISM band
with 8 selectable channels
Carrier Frequency : 2400 ~ 2483 MHz
Operation Voltage : Transmitter 3.6 ~ 5VDC
: Receiver 3.7 ~ 5VDC
(Lithium-polymer rechargeable batteries)
Frequency Response : 20 ~ 20 KHz
Frequency stability : ±100 KHz, Typical
S/N ratio : >70dB (Typical)
Channel Separation : 100dB (Typical)
Operation distance : 30 Meters ( L. O. S. )
Decoder Type : Dolby Digital
(AC3,Dolby Pro Logic)
SPECIFICATIONS
6
7
5
4
3
2
1
5
4
3
2
1
2
2.4GHz 5.1 Channel RF Unit
BACK:
FRONT:
Power Select Key
> Press for Power on/off .
Channel Select Key
> Press quickly (less than one second) for channel change
(Audio in LED will flash) .
Input Select Key
> Auto Select Audio in, (to search Optical >Coaxial >Line-in)
Press for Optical (LED blue), press again for Coaxial
(LED blue), Press again for Stereo line-in (LED blue) .
POWER
1. CH-SEL
2. VOL+
3. VOL-
4. MIC CONNECTION
5. CHARGE
6. BATTERY DOOR
7. POWER
1. DC OUT
2. DC IN
3. COAXIAL
4. OPTICAL
5. LINE IN
INPUT
SELECT
CHANNEL
SELECT
2.4GHz HEADPHONE RECEIVER
2.4GHz TRANSMITTER
Line
Opti
Coax
POWER
INPUT-SEL
CH-SEL
