11
5.2 SETTINGS
A.
Operation mode setting
a.
Normal Operation
Press POWER key to turn on the unit.
The unit operates in normal mode with the default 60% humidity set-point.
The fan runs at Turbo speed by default.
Press POWER key again to turn off the dehumidifier.
The fan keeps running for a while and then stops.
The display reads room relative humidity.
b.
Drying Operation
Press POWER key to turn on the unit.
Press the MODE key to activate the continuous drying mode.
The unit starts to dehumidify in continuous operation, regardless of the
humidity. The humidity set-point cannot be adjusted in this mode.
Press the MODE key again to deactivate the continuous drying mode.
Note: For continuous operation the drain hose should be connected in
order to continuously drain the collected water.
B.
Set Humidity (setting range: 20%-90%):
The humidity set-point can be adjusted in normal operation.
Press ADD/MINUS key
repeatedly to adjust humidity set-point by
increments of 5%.
Set the humidity level between 40% and 60% for
comfort. The unit will cycle on and off to maintain the level.
C.
Set Fan Speed:
Press Fan key to switch the speed between Turbo and Sleep.
Note: The fan speed cannot be set when in defrosting progress.
D.
Timer Setting
（
0-24hours
）
: