© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
BCE216-3LG_DBL_LST_EN_0804.PDF • PAGE 1
A
Building Safety. Building Security.
• BCnet sectional control panel with
two integrated loop interfaces
• Extends a BCnet sectional control
panel BC216-2 or BC216-3 by two
loops
• Analogue ringbus technology with
unshielded detector cabling
• Easy installation, also possible later
on
Fire is a permanent threat to life and property. There-
fore, immediate response to a fi re is imperative. The
main objective of the fi re detection control panel Series
BC216 is to alarm and to react in time and, conse-
quently, save lives and protect property. For decades
LST have focused their aims to undertaking unrivaled
efforts in order to realize new innovations in the security
area. Research, development and production are loca-
ted within LST premises, thus guaranteeing fl exible and
reliable individual solutions.
Using a 32-bit multiprocessor system, the fi re detection
control panel Series BC216 ensures topmost effi ciency
and speed – prerequisites for saving lives and minimi-
zing damage to property.
Description
The BCnet Sectional Control Panel/Extension BCE216-
3LG allows for the extension of a fi re detection control
panel BCnet216 by two ADM loops. The extension is in-
tegrated into the fi re detection control panel BCnet216
by installing it in a BCnet sectional control panel BC216-
2 or BC216-3 and connecting it to the GSSnet cabling
via the GSSnet interface on the extension.
The 24V supply of the BCnet Sectional Control Panel/Ex-
tension BCE216-3LG is powered from the BCnet sectio-
nal control panel in whose cabinet it has been installed;
it does not have a power supply or battery charger of
its own. The extension is designed as compact unit and
mounted on a pivoting sheet steel carrier.
The loop processing functions of the BCE216-3LG fully
correspond to the functions of a BCnet Sectional Con-
trol Panel BC216-2 equipped with two Loop Interfaces
LIF64-1.
The ADM loop principle offers intelligent analogue ring-
bus technology with bi-directional data transfer. Each
loop provides for the software-aided administration of
up to 198 physical address points in a maximum of 128
detector zones.
Easy parameterisation by means of PC software en-
ables you to optimally adapt the control panel to your
individual requirements.
