______________________________________________________________________________
Operating Manual ver. WM3A-EN-1.0 |9
For installation on a pole, use the pole mount plate in the bottom of the case.
Loudspeaker can be installed on a tripod or on a sub using a simple pole.
Do not attempt to suspend more than one speaker on a stand designed for a
single speaker.
For suspended installation, there are five brackets inside the case: two in the
left side, three in the right side. Each bracket is secured to two adjacent
internal side of speaker using two M10 screwbolts.
If needed, replace the screwbolts with eyebolts.
More detaliled:
One bracket is connected between left and rear side of case.
One bracket is connected between right and rear side of case.
One bracket is connected between right and bottom side of case.
One bracket is connected between left and front side of case.
One bracket is connected between right and front side of case.
When installation is in suspended mode, use the brackets.
Unscrew one of the two screws that hold a single bracket, the second screw
must be screwed only after the first one has been tightened to avoid the
bracket moves.
Use plugs suitable to support the weight of the entire apparatus.
