PSAT1________________________________________________________________________________
8| Operating Manual ver. PSAT1-EN-1.0
INSTALLATION AND WIRING
PSAT1 speaker can be mounted to the wall or suspended.
For suspended installation, there are eight brackets inside the case: four in
the top, four in the bottom. Each bracket is secured to two adjacent internal
side of speaker using two M10 screwbolts.
More detaliled:
Two bracket are connected between top and left side of case.
Two bracket are connected between top and right side of case.
Two bracket are connected between bottom and left side of case.
Two bracket are connected between bottom and right side of case.
When installation is in suspended mode, use the upper or lower brackets.
Unscrew one of the two screws that hold a single bracket, the second screw
must be screwed only after the first one has been tightened to avoid the
bracket moves.
If needed, replace the screwbolts with eyebolts.
Speaker can be suspended too using the flying tracks placed in the sides
and rear of the case. Multiple flying tracks allow to choice the position and
inclination of suspended speaker.
Use plugs suitable to support the weight of the entire apparatus.
Side
Handles
Side Flying
Tracks
Side Flying
Tracks
Rear Flying
Tracks
Rear Flying
Tracks
Fixing
Points
