______________________________________________________________________________
Operating Manual ver. HPS246-EN-1.1 |9
Choose a safe mounting location, so as to prevent the cables can be
stepped on or create tripping hazards.
Before making connections between mixer and speakers, make sure the
mixer volume is turned down.
In the connection panel there are two Speakon NL4 connectors referred as
‘IN’ and ‘OUT’.
IN is the input connector and must be connected to the amplifier,
‘OUT’ is a
LINK OUT and can be connected to other systems.
Recommended configuration using multiple speakers is represented below:
Channel 2 has been linked from In to the out.
You can now use the system
Amplifier
O
u
tp
u
t
A
O
u
tp
u
t
B
Input A
Input B
NL4 Pin Configuration
Pins 1+ and 1-
Used
Pins 2+ and 2-
Not Used
Mixer
Amplifier Load (per Output Channel)
# of Speakers
Nominal
Minimum
1
4 Ohms
3.5 Ohms
2
2 Ohms
1.8 Ohms
Caution: Do not exceed the
maximum load rating of
the amplifier.