TIWI5
ANTENNA DESIGN GUIDE
The information in this document is subject to change without notice.
330-0093-R1.3
Copyright © 2012-2016 LSR
Page 14 of 23
4
PCB Layout Requirements
Since this module and its associated set of approved antennas has been certified by the FCC and
Industry Canada (IC) as a Modular Radio, the end user is authorized to integrate this module into
an end-product, and is solely responsible for the Unintentional Emissions levels produced by the
end-product
In order to preserve the Modular Radio certifications, the integrator of the module must abide
by the PCB layout recommendations outlined in the following paragraphs. Any divergence from
these recommendations will invalidate the modular radio certifications and require the
integrator to re-certify the module and/or end-product.
The module must be used with one of the approved antennas:
1.
LS Research 001-0009 center-fed dipole antenna and 080-0001 U.FL to Reverse Polarity SMA
connector cable.
2.
Johnson 2450AD46A5400 2.4/5.4 GHz Ceramic Chip Antenna.
