——————————————
Zubehör von
—
Das Original
——
Rev. 00 17/07/2016
Seite 4 von 4
Align the rear fender of your option,
Drill holes each 6.5mm, deburring this.
Install the supplied bracket on which the drilled holes from you and then mount the fender to your
vehicle according to the following scheme:
Use the
original bolts
and washer for the
front bracket
.
Use the
LSL bolts M6x20mm ULS
for the
rear bracket.
Check all bolts for proper seat, be careful
not to over-tighten the bolts
,
otherwise you will bend the fender!
Ride safe and have fun!
