——————————————
Zubehör von
—
Das Original
——
Rev. 00 11/06/2016
Seite 4 von 6
Fitting:
Step 1:
Secure your vehicle against falling over and relieve the front wheel.
Dismantle first your original fender.
Step 2:
Mount initially in the highest position the
right
fender bracket (02) with bolts
2x M6x22 (07) and washers (05) and self-locking nuts M6 (04).
Mount initially in the highest position the
left
fender holder (02) with bolts
1x M6x22 (07) in the direction of travel front and 1x M6x25 (08) incl. original brake line holder
in the direction of travel rear and washers (05) and self-locking nuts M6 (04) ,
Don´t tighten the bolts finaly.
Step 3:
Install the fender(01) to the already mounted fender bracket.
Use the supplied mounting materials as shown below. Don´t tighten the bolts finaly.
Step 4:
Align your front fender kit and tighten all bolts finaly.
M6x22 (07)
fender bracket
(02)
Nylon washer
(06)
Fender
(01)
self locking
nut M6
(04)
washer
(06)
M6x14 (03)
washer
(06)
washer
(06)
self locking
nut M6
(04)
1x M6x22 (07)
1x M6x25 (08)
