——————————————
Zubehör von
—
Das Original
——
Rev. 01 14/03/2018
Seite 4 von 6
Fitting:
Step 1:
Secure your vehicle against falling over and relieve the front wheel.
Dismantle first your original fender.
Step 2:
Install the right & left fender bracket (02) with original hexagon bolt in the highest position
first. Don´t tighten the bolts finaly.
Step 3:
Align the fender in the desired position and mark the holes. Drill 6,5mm holes at the
markings and deburr them.
Step 4:
Install the fender(01) to the already mounted fender bracket.
Use the supplied mounting materials as shown below (4X). Don´t tighten the bolts finaly.
Step 5:
Align your front fender kit and tighten the bolts finaly.
fender bracket
(02)
Nylon washer
(05)
Fender
(01)
self locking
nut M6
(06)
washer
(04)
M6x14 (03)
originial bolts
