——————————————
Zubehör von
—
Das Original
——
Rev. 04 21/11/2017
Seite 8 von 12
Step 4:
Install brake pump and heel protector with two bolts M6x25mm, 2x nut M6 self locking.
Turn the brake pipe connection approx. 45 ° to the rear, bleeding the brake system as required
by the manufacturer.
Step 5:
Connect the brake lever with M6x40mm and bushing Ø 14x6,2x15mm to the brake pump.
Step 6:
A proper adjustment with a small gap of the brake lever is necessary to avoid permanent
braking. Adjust the excenter at the brake lever to switch on the brake light in the right moment.
heel protector
M6x25mm
M6x40mm
bushing
Ø14x6x15mm
nut M6
self locking
adjust excenter
for brake light
