LSIS GOL-RR8T Скачать руководство пользователя страница 68 | Manualshive

Страница: 68 / 69

LSIS GOL-RR8T Скачать руководство пользователя страница 68

Warranty and Environmental Policy

Warranty

1. Warranty Period

The product you purchased will be guaranteed for 18 months from the date of manufacturing.

2. Scope of Warranty
Any trouble or defect occurring for the above-mentioned period will be partially replaced or repaired. However, please note the

following cases will be excluded from the scope of warranty.

(1)  Any trouble attributable to unreasonable condition, environment or handling otherwise specified in the manual,
(2)  Any trouble attributable to others’ products,
(3)  If the product is modified or repaired in any other place not designated by the company,
(4)  Due to unintended purposes
(5)  Owing to the reasons unexpected at the level of the contemporary science and technology when delivered.
(6)  Not attributable to the company; for instance, natural disasters or fire

3. Since the above warranty is limited to PLC unit only, make sure to use the product considering the safety for system configuration

or applications.

Environmental Policy

LSIS Co., Ltd supports and observes the environmental policy as below.

LSIS considers the environmental preservation
as the preferential management subject and
every staff of LSIS use the reasonable
endeavors for the pleasurably environmental
preservation of the earth.

LSIS’ PLC unit is designed to protect the
environment. For the disposal, separate
aluminum, iron and synthetic resin (cover) from
the product as they are reusable.

Environmental Management

About Disposal

«
...
66
67
68
69
»

Содержание GOL-RR8T






































































Отзывы:

Нет отзывов