LSI LASTEM M-Log – User’s manual
18
4.3
Display informations and controls
Through the user interface of the instrument, is possible:
Input of commands with immediate effect
Display of:
o
Product presentation window;
o
Instantaneous values’ scrolling list of all programmed measures;
o
Diagnostic information.
4.3.1
Input of commands with immediate effect
M-Log
key gives the double function to key pressed with it contemporaneously.
4.3.1.1
Power on and power off the instrument
When the instrument is off, pressing
and
keys contemporaneously, the instrument turns
on and shows the product presentation mask (see §
Errore. L'origine riferimento non è stata
trovata.
) that will be displayed for about 10 seconds; when this mask disappears, the datalogger
will start the survey according to the configuration saved before the shutdown.
When the instrument is on, pressing the same (
and
) keys, the instruments shows the
mask below and will be awaiting for confirmation through
key before its definitive shutdown;
at pressing of any other key the instrument will return to previous condition.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
P
r
e
s
s
F
n
t
o
c
o
n
f
i
r
m
4.3.1.2
Fast acquisition mode
Pressing
and
keys contemporaneously from instantaneous data display mask, it’s
possible make sensors acquisition rate faster than rate set-up by configuration.
Pressing again
and
keys contemporaneously the acquisition rate will return to follow the
configuration setup..
For more details see §5.2.5
