www.LightingServicesInc.com
Page 5 of 6
IS-0139_A
Aiming the
Self-
Locking
and
Wrench-
Locking
Fixtures
Before Aiming:
For self-locking, you do not need
an external locking device to set the horizontal and
vertical focus. For wrench locking, use the
supplied Allen key (3/32 inches) to set and lock the
horizontal and vertical focus.
STEP
ACTION
1
Turn off all power to the fixture,
including the fixture switch on the
fitting, and let the lamp cool.
WARNING: LED and fixture may be
hot.
2
Do you want to aim the fixture
horizontally or vertically?
For horizontal aiming,
hold the
lamp housing and turn it left or
right until you achieve your desired
orientation (
Fig. 12
).
For vertical aiming,
hold the lamp
housing and angle it up and down
until you achieve your desired
orientation (
Fig. 13
).
For wrench locking:
After aiming,
insert the Allen key into the
horizontal or vertical focus lock
(
Fig. 14
), and turn it clockwise to
tighten.
Note:
Allen key is supplied for track
and busway fixtures. It is stored in
fitting handle (
Fig. 15
).
3
Restore power.
WARNING: Do not look directly at
the lit LED.
Figure 15. Allen key storage in fitting.
Push in to secure the key.
Figure 12. Turn fixture left or right to set the
horizontal focus.
Figure 13. Angle fixture up or down to set the
vertical focus.
Figure 14. Horizontal focus lock (L). Vertical
focus lock (R).
Pull to remove
Push to store
