DB11-000088-00, Version 1.0, May 2007
Find a list of LSI Corporation’s U.S. distributors, international distributors, sales
offices, and design resource centers on the LSI web site at:
LSI, the LSI logo design, and Fusion-MPT are trademarks or registered
trademarks of LSI Corporation. All other brand and product names may be
trademarks of their respective companies.
Copyright © 2007 by LSI Corporation. All rights reserved.
LSI Corporation reserves the right to make changes to any products and services
herein at any time without notice. LSI does not assume any responsibility or liability
arising out of the application or use of any product or service described herein,
except as expressly agreed to in writing by LSI; nor does the purchase, lease, or
use of a product or service from LSI convey a license under any patent rights,
copyrights, trademark rights, or any other of the intellectual property rights of LSI
or of third parties.
Step 4
Secure the bracket to the system’s chassis.
Install the bracket screw, when present, or
engage the system retention mechanism to
secure the HBA to the system’s chassis.
Step 5
Connect the SCSI devices to the host adapter.
Connect the SCSI devices to the external very
high-density 68-pin SCSI connectors.
Step 6
Replace the cover, the power cord(s), and power-
up the system.
Replace the system’s cover, reconnect the power
cord(s) and any network cables. Turn power on.
The LSI22320SE hardware installation is complete and you
are ready to install the operating system drivers. You can find
the most recent drivers at:
W I N D O W S D R I V E R I N S T A L L A T I O N
To load the
SYMMPI.SYS
miniport driver during a new
Windows 2000 or Windows XP system installation or to load
the
LSI_SCSI.SYS
driver during a new Windows 2003
system installation, you can boot directly from the Microsoft
installation CD-ROM. The Windows drivers are not
interchangeable; however, the instructions are similar.
To install a new Windows operating system and its
appropriate device driver, follow these steps:
Step 1
Using another computer, copy the appropriate
driver files supplied on the LSI Device Drivers &
Utilities CD onto a diskette. This diskette is
needed in Step 6. To create the driver diskette,
open the driver folder on the CD, and then open
the folder for the version of the Windows
operating system to be installed on the new
system. Next, select all folders and files within the
directory and copy them to the root directory of a
clean floppy diskette.
Step 2
Boot the computer from the Windows CD-ROM.
Step 3
Press F6 when the words
Setup
is
inspecting
your
computer's
hardware
configuration
appear, or when the Windows operating system
prompts you for nonsupported drivers.
Important:
You must press F6 for the system to recognize
the new driver. Otherwise, the system does not
recognize the devices controlled by the driver
during the Windows setup.
Step 4
Follow the instructions until a screen displaying
the words
Setup
could
not
determine
the
type
of
one
or
more
mass
storage
device…
appears.
Step 5
Choose S to specify additional devices.
Step 6
Follow the prompts and insert the Windows driver
diskette when you are prompted to insert the
hardware support disk. Select the driver version
appropriate for your system.
Step 7
Follow the Windows installation procedure to
complete the installation. Microsoft provides
documentation with its installation CD-ROM.
Note:
Refer to the
Fusion-MPT Device Management
User’s Guide
for detailed configuration and
installation instructions for all firmware and
drivers.
L I N U X D R I V E R I N S T A L L A T I O N
Consult the Linux
mptlinux.txt
file on the LSI Device
Drivers & Utilities CD. LSI provides Open Source Drivers that
may be implemented in the following ways:
•
Adding precompiled binaries to an existing installation
using driver update disks or RPMs for selected
distributions.
•
Adding or updating the Fusion-MPT source in the Linux
kernel for any distribution.
T E C H N I C A L S U P P O R T
For assistance installing, configuring, or running the
LSI22320SE, contact LSI Technical Support:
Phone
:
1-800-633-4545 (North America)
+44.1344.413.115 (Europe)
Web Site
: