LSI GS026, Инструкция по установке и эксплуатации

Страница: 4 / 9

4
4. Operation
The radio anemometer is supplied with a
battery and is ready for installation. It does
not need to be calibrated or adjusted.
Refer to the GS320/GS550/GS820 manual
for instructions on how to add the
anemometer to the sensor list of the
display.
5. Battery replacement
After a period of about 3 years of normal
use, the battery may need to be replaced.
To ensure the same battery life as the
original battery, replace with:
3.6V lithium D cell
Alternatively, for about 12 months of
battery life, replace with:
1.5V alkaline D cell
To remove the battery compartment cover,
rotate ¼ turn counterclockwise. To close the
battery compartment cover turn ¼ turn
clockwise.
6. Replacement parts
PD058-A: Windcup Set Replacement
PD058-B: Battery Cap Set Replacement
PA122-A: Wind Speed Sensor Pivoting
support Replacement
TB021: Battery Lithium “D” Size
QS054: Replacement hairpin for PA122
QW251: Replacement washer for PA122
IMPORTANT! The positive battery
contact must point to the battery
compartment cover (see picture
below.)