3-axis ultrasonic anemometer
–
User manual
INSTUM_ 04861
Page
10/15
3.2
Accessing the configuration
Once the anemometer has been connected to the PC
(§3.1), turn on the sensor and check the reception of
the values on the terminal.
Press the key
?
to access the main menu.
The menu items can be selected by entering the let-
ter assigned to each item.
Upon selection a submenu
is opened or the selected parameter is displayed with
its value. Changes to values are confirmed with
Enter
or discarded with
Esc
.
If no key is pressed on the PC, the sensor spontaneously returns to the previous menu until exiting Setup.
3.3
Disabling compass
To disable the compass, connect the anemometer to the PC (§3.1), turn on the sensor and hold down the
#
key. Then proceed with the configuration for operation with manual North orientation.
To position the sensor, refer to §2.2.
