5-20-2021 Page 5 of 7
the measurement data is held on the display. To measure again, press the button to cancel the "HOLD"
state and return to the "Measuring" state.
(2) QC Mode
If the instrument is set to QC mode, remove the calibration holder after calibration, place the measuring
port of the instrument on the surface of the object to measure, short press the button to measure, the
instrument will judge whether the measured value is qualified. The upper and lower limits could be set by
PC software. For specific operations, please refer to the "
Gloss Meter Software Operation Manual
".
V. PC Software
Connect the instrument to PC software via USB cable to perform functions of online measurement,
change calibration values, parameter setting, test report generation and printing. For specific operations,
please refer to "
Gloss Meter Software Operation Manual
".
