LSC maXim Скачать руководство пользователя страница 9

Страница: 9 / 72

maXim Operator Manual

Introduction

LSC Lighting Systems (Aust) Pty. Ltd.

Page 3 of 66

•

2 banks of 9 pages of Non volatile memory.

•

Separate In (up) and Out (down) fade times (0 to 999 seconds).

•

Extensive

Recording

and

Editing

facilities for Scenes, Chases and Stacks.

•

Scene Fade Times can be derived from the Time Faders or from Memory.

•

Dedicated Stack Playback module.

•

Electronic labelling of all scenes, chases, stacks and stack steps.

•

Fully proportional Softpatch.

•

Flash level control, with associated Add or Solo mode button.

•

Page freeze retains active output when pages or modes are changed.

•

User prompts are scrolled on the display and active buttons flash to make operations simple.

•

Different languages are available.

•

Multi display SVGA colour video output (optional on S and M models).

•

DMX 512/1990 output signal. 2 Universes on larger models.

•

Power supply is auto selecting, 90

−

260 volts.

1.3 SPECIFICATIONS

XXL

DMX512 Output Channels

512

1024

Fader Channels (Wide Mode)

120

Fader Channels (Preset Mode)

Red Playbacks (Scene Mode)

Pages of Red memory

Blue Playbacks

N/A

Pages of Blue memory

N/A

Grab Master

N/A

Maximum number of Scenes *

108

216

378

594

810

Maximum Fade times

>16min

Maximum number of Chases*

108

216

378

594

810

Steps per chase

250

Chase speed (Beats Per Minute)

0-999

Maximum number of Stacks *

Steps per Stack*

500

SVGA Colour Video output

Optional

Standard

PATPAD Moving light module

N/A

Optional

3.5” Floppy Disk

Optional

Standard

Dimensions Height (mm)

155

200

Width (mm)

464

710

831

1047

1264

Depth (mm)

380

520

Weight – packed

(kgs)

9.0

13.0

26.0

32.0

38.0

*Subject to memory availability and whether memory Expansion Module is fitted.

1.4 OPTIONS

•

MAXLITE 12” Gooseneck desk light (2 required for L, XL & XXL maXims) .

•

MAX/V

Video and Disk Drive add-on pack for maXim S and M models.

•

MAX/P

PATPAD moving light module. Not available for maXim S and M models.

•

MAX/M

Memory Expansion Module.

•

Dustcover

Sizes available for all models.

•

Flightcase

Custom flightcases for all models are available to house the maXim, 12V

gooseneck lamps, manual, power lead and floppy disks.

1.5 CARING FOR YOUR MAXIM

The maXim is manufactured from quality components and will give many years of service if you
take some basic precautions.

Содержание maXim









































































Результаты поиска

Содержание maXim

Отзывы:

LSC maXim, Руководство оператора, Страница: 9 / 72

Результаты поиска

Содержание maXim

Отзывы: