Gen VI Dimmer
User Manual
Page 18
5.3.4
Status
On the “Dimmer Output” home page, pressing
Status
shows the following information….
It shows the presence of the input power phases, DMX presence, the current setting of the DMX
termination, dimmer running time, last cause of a reset, internal temperature and the fan speed and
fan setting (constant speed or automatic).
Pressing
About
shows the software versions, RDM ID and the optional “Owner” name. See section
9 for more information about RDM.
5.3.5
Owner
Warning
: If you enter an owner name and or logo and press “Lock”, this is permanently locked and
can only be changed by an authorised LSC dealer. You must set the name and logo before pushing
Lock. Once Lock has been pressed, the name and logo cannot be changed without contacting the
factory.
This acts as a deterrent against theft of your APS.
Pressing
Owner
allows you to enter a permanent name for the dimmer (“This unit belongs to:”) as a
deterrent against theft.
The “Owner” menu also allows you to set a “Logo” that will be momentarily
displayed when power is applied to the GEN·VI instead of the LSC logo.
To enter an owner name, use the
Next
and
Prev
buttons to select a character then
Add
to enter the
character or
Del
to delete a character.
To set a custom logo a special file must be present on an SD card inserted in the APS. There is a
fee for LSC to convert your logo into the special file that will load into your APS. Please contact LSC
or your LSC agent for details.
When the owner name and/or logo have been entered, the Exit button changes to “Lock”. To
permanently lock in your changes press
Lock
.
Set Logo