LS MTRON KTFM-84S, Руководство пользователя

Страница: 4 / 29

SAFETY PRECAUTIONS
CHECKS BEFORE USE
▶
▶
ADDING OIL AND INJECTING GREASE
▶
▶
CHECKS BEFORE MOVE FORWARD & BACKWARD
▶ Stay clear when the mower is running.
▶ Never step on the machine while it is driving and during transport.
▶ Move backward at slow speed. Inspect backward and under the mower.
TRANSPORT
▶
▶
▶
CLOTHES & PROTECTIVE EQUIPMENT
▶
▶
shoes.
▶
▶
▶
▶
Check the gearbox oil and grease state.
Belt tension : Maintain to be just tight enough to prevent slipping.
Most tractor and/or Mower equipment accidents can be avoided by following simple safety precautions.
The safety information given in this manual does not replace safety codes, insurance requirements, federal,
state, and local laws. Make sure your machine has the correct equipment required by your local laws and
regulations. Understand that your safety and the safety of other persons are measured by how you service
and operate this Mower.
Know the position and operations of all controls before you try to operate. Make sure you check all controls
in a safe area before starting.
Read this manual completely and thoroughly and make sure you understand all controls. All equipment has
a limit. Make sure you are aware of the stability and Mowing characteristics of this Mower before you begin
operation.
This safety alert symbol indicates important safety messages in this manual. When you see this
symbol, carefully read the message that follows and be alert to the possibility of personal injury
or death.
SAFETY PRECAUTIONS
LS Mtron grooming mower described in this manual have been designed to mow lawn only.
The operator must wear the suitable clothing and personal protective equipment at while working on the
mower or running it.
Use safety gloves & safety glasses or masks, to protect the operator's eyes and face. Wear safety
CHECKS BEFORE START-UP
Make sure that the mower and the tractor are certainly connected.
LS Mtron grooming mower is designed to be combined with 2HP~40HP tractors equipped with a
category-1 3point link system a 540-rpm clockwise PTO.
When adding the oil, please stop the tractor's engine.
Often injecting grease at BLADE ASSMBLY #1, #2, #3 part and WHEE ASSEMBLY part.
Without using proper hinge pins & related lynch pins.
Always disengage the PTO for transport. Avoid that the mover touches the tractor when raised and that
the tractor lower arms are stabilized and do not touch the inside of the tires.
Check that the PTO does not touch the front of the mower deck in the raised position.
Travel at a safe speed, especially on rough ground. Allow adequate room for vehicles to pass when
traveling on the road.
4