LS Industrial Systems TS1000H, Руководство пользователя

Страница: 18 / 55

17
H.
Installation and Handling
1.
설치시 주의사항 4.
온도 센서
1. Precautions for installation.
Before use, please make sure to read the user manual and precautions for safety.
Please give the product user manual to the end user or a person in charge of repair.
Precautions for safety reasons.
Before handling, wiring work, operating, repair and inspecting, please read precautions for
safety reasons and danger prevention to enable proper product use. Please make sure to
follow these because they are very important details about safety.
Danger : If you violate this instruction, it could result in death or serious injury.
Warning : If you violate this instruction, it could result in light injury or material damage.
Danger
1.
Before you install the product, please make sure to turn the above circuit breaker off. There
is a danger of electric shock during installation.
2. Please be careful not to contact terminal exposure unit. It can result in electric shock or
short circuit fault
3. Please do not let any parts of your body touch two exposed hotlines at the same time.
Even if there is an electric shock, the circuit breaker might not operate.
1. Precautions for safe use.
Warning
1. Before installing the product, please read precautions and install it accordingly.
2. There is a danger of fault operation or accident from incorrect installation.
Please let a qualified person (electrician) install and repair the circuit breaker.
3. Please avoid installation in environments with rain, oil, dust, direct sunlight etc. There is a danger
of electric shock, leakage, short circuit, fire and fault operation.
1) Usage temperature : -5~40
℃
(But, average over 24hr should not 35
℃
)
2) Relative Humidity : 45~85% ( Max. temperature 40
°
C ~ below 50% )
3) Altitude : Below 2000m
4) Avoid abnormal vibration and impact, excessive vapor, oil, smoke, dust, corrosive gas, and
flammable gas.
4. Please connect to the power which is suitable for the product’s rated voltage and current. If the rated
voltage and current are not correct, it can cause damage or loss.
5. If there is shortage of tightening torque at the terminal, it can cause overheating or fire so please fix
the terminal firmly referring to the stated tightening torque on each product’s user manual.
* For more details see the installation method for different types of product.
6. When you install the terminal, please install connection conductor and each phase in parallel.
There is a danger of short circuit fault between each phase.
7. You can not test insulation resistance measurement and internal voltage between each phase. If you do
those tests between each line of circuit breaker, please separate this product from circuit. There might
be a fault.
8.
Please be sure to ground the earth terminal of electrical machinery.
9.
Please make sure to install an insulation barrier between each phase. If it’s not installed, there is a danger
of short circuit between phase.
10.
If the circuit breaker operates and break automatically, please remove the cause and then operate
the handle.
11.
Please do not make unauthorized alternation.
12. Please follow your own country’s guidelines for disposal of this product.
13.
Please do not connect aluminum terminal and conductor directly to circuit breaker’s terminal. It will cause
corrosion and heating.