WARRANTY
Long Range Systems, Inc. warrants this product against any defects that are due to faulty material or
workmanship for a one-year period after the original date of consumer purchase. This warranty does not
include damage to the product resulting from accident, misuse or improper electrical connection. If this product
should become defective within the warranty period, we will repair or replace with equivalent product, free of
charge. We will return your product, transportation charges prepaid standard UPS Ground shipping mode,
provided the product is shipped prepaid to:
Long Range Systems, Inc.,4550 Excel Pkwy, Suite 200, Addison, TX 75001.
No return or replacement can be received without prior authorization and
the proper RMA Number posted to the outside of the shipping container.
This warranty gives you specific legal rights and you may also have rights that vary from state to state.
Copyright © July 2009, Long Range Systems, Inc. All Rights Reserved
This document contains proprietary information of Long Range Systems, Inc. (LRS) and is intended for use
only by its employees or customers. None of the material contained herein may be copied, reproduced,
republished, downloaded, displayed, posted, or transmitted in any form or by any means, including but not
limited to, electronic, mechanical, photocopying, recording, or otherwise without the prior written permission of
LRS. Additional copies of this manual may be obtained by contacting LRS.
Screen displays, keyboard layouts, hardware descriptions, or software are proprietary to LRS and are subject
to copyright and other intellectual property rights of LRS and shall be treated in accordance with the previous
paragraph.
All attempts have been made to make the information in this document complete and accurate. LRS is not
responsible for any direct or indirect damages or loss of business resulting from inaccuracies or omissions.
Specifications and other information contained within this document are subject to change without notice.
Long Range Systems, Inc. reserves the right to make changes without further notice to any products herein.
Long Range Systems, Inc. makes no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does Long Range Systems, Inc. assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation consequential or incidental damages. “Typical” parameters that may be provided in Long Range
Systems, Inc. data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals”, must be validated for each
customer application by customer’s technical experts.
Long Range Systems, Inc. products are not designed, intended, or authorized for use as components in
systems intended to support or sustain life, or for any other application in which the failure of the Long Range
Systems, Inc. product could create a situation where personal injury or death may occur.
Should Buyer purchase or use Long Range Systems, Inc. products for any such unintended or
unauthorized application, Buyer shall indemnify and hold Long Range Systems, Inc. and its officers,
employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that Long Range
Systems, Inc. was negligent regarding the design or manufacture of the part, device or system.
EU DECLARATION OF CONFORMITY
We, Long Range Systems hereby declare under our sole responsibility that the T1605 paging transmitter and
on-site pagers complies with the essential requirements in the European RE&TTE Directive 1999/5/EC of the
European Parliament of the Council of 9 March 1999 on radio equipment and telecommunication terminal
equipment and the mutual recognition of their conformity. The following standards were utilized:
ETS 300 224: 1998
EN 301 489-2: 2002
EN61000-3-2: 1998
EN 61000-3-3: 1995
EN 60950: 1992 with A1, A2, & A3.
