LRS Butler II TX-1605-5, Руководство по программированию, Страница: 7 / 19

USER MANUAL | Butler II
LRSUS.COM | 7
Lockout
A three digit code that disables the external sensor input (e.g., the door alarms and the
staff disables the alarm at the Butler II) for a selected period of time.
To set:
1. Enter a 3 digit Lockout Sequence.
2. Select a Lockout Setting.
• Indefinite will disable the unit until the external input is activated.
• Enter an interval of 179 or less to disable the unit for 179 seconds or less.
3. Press Update Butler when done.
To Use:
1. Press side button until the unit begins flashing.
2. Enter the 3-digit disable code. The LED will begin flashing rapidly.
3. If the unit is set for:
• Less than 180 seconds - The unit will rearm after the preset lockout time.
• Indefinite - The unit will only rearm if the external contact is activated.
System ID
In the event more than one LRS system is in a close proximity to another, a system ID can
be changed to avoid interference (Note: Each individual pager must have it’s system ID
changed). To set:
1. Select the ID to use.
2. Press Update Butler when done.