LPA Medical Dyn-Ergo S-150, Инструкция по эксплуатации

Страница: 11 / 29

11
1. You can adjust the seat depth by
sliding the backrest forward or
backwards.
WARNING: THE CHAIR MUST BE UNOCCUPIED WHEN MAKING THIS
ADJUSTMENT.
SEAT DEPTH
2. Using a 1/2" (13 mm) wrench,
loosen the 4 bolts under the seat
structure that go through slots
that control the seat’s depth.
WARNING: DO NOT REMOVE THEM
ALL THE WAY.
3. Adjust the backrest to the desired
position by sliding both sides
at the same time so that the
backrest moves uniformly.
4. When the appropriate depth is
reached and equal on both sides,
firmly tighten the 4 bolts.
5. Get the user to try it and readjust
it, if needed.
The seat depth adjustment (from 13 ¾" to 18") is done according to
the length of the user's leg. It is important that the hollow in the back
of the knee (the popliteal fossa) has proper clearance. Adjust the depth
of the seat so that your hand easily passes between the knee and the
seat cushion. This adjustment will promote good contact with the seat
and the back with the backrest.
1/2