LP HAL600 Atlantic, Руководство пользователя, Страница: 10 / 23

G - Rear Panel Description
① ② ③ ④ ⑤
⑥ ⑦ ⑧ ⑨
F
①
an with safety grill.
②
RF OUTPUT RF Output Connector. Connect the coax cable to the
antenna.
③
RF INPUT RF Input Connector. Connect the coax jumper cable from the
transceiver.
V
④
entilation hole.
⑤
DATA I/O D-Sub Female (15pin) Socket.
Connect the data communication cable HAL <> Transceiver.
⑥
GND Ground Terminal.
⑦
TX GND RCA Jack. Connect the control cable from the TX GND terminal
(SEND, REMOTE etc.) of the transceiver. Electrical conditions are 24 VDC of
open voltage at receive mode (RX), and short current of 15 mA at transmit
mode (TX).
⑧
230 VAC AC Mains Socket. Socket for the AC power cord.
⑨
FUSE 6 A Fuse for AC Mains. (250 V / 6.3 A glass fuse. (5 x 20)).
10