manualshive.com logo in svg

LOYTEC L-IP, Руководства пользователя, Страница: 44 / 173

Поделиться
Скачать
LOYTEC L-IP Скачать руководство пользователя страница 44

L-IP User Manual 

44 

LOYTEC 

Version 6.1 

LOYTEC electronics GmbH 

 

0 – NTP Servers 

The device can be configured to synchronize its clock with NTP time. Enter the IP address 
or  DNS  name  of  a  primary  and,  optionally,  a  secondary  NTP  server.  The  device  will  use 
NTP as a time source if the time sync source in the system configuration is set to 

NTP

. 

a - Connection Keep Alive 

The L-IP allows to automatically ping other devices on the IP channel in order to maintain 
an  IP  connection  that  might  be  automatically  disconnected  after  a  specific  period  of  time 
(e.g. DSL routers automatically disconnect if no activity is detected). The options to choose 
are: 

Select connection keep alive mode 
(0 - disabled, 1 - auto IP, 2 - custom IP): 

Enter 0 to disable this feature, enter 1 for auto IP mode and 2 to specify one IP address that 
should receive the pings. If auto IP mode is selected and the L-IP works as a configuration 
server, a ping message is sent to all devices in the device list of the configuration server. If 
the configuration server is disabled on this L-IP a ping message is sent to the configuration 
server for the IP-852 channel.  

Please  refer  to  Section  5.10  on  how  to  monitor  the  automatic  keep-alive  feature  and  to 
display the ping response times for the different devices on the IP-852 channel. 

b - Link Speed & Duplex 

If  the  L-IP  is  operated  with  an  old  10Mbit/s-only  hub  the  link  speed  should  be  switched 
from  “Auto  Detect”  to  “10Mbps/Half-Duplex”.  With  modern  100/10Mbit/s  switches  this 
setting can be left at its default. 

5.7  CEA-852 Device Configuration Menu 

This  menu  holds  relevant  information  regarding the configuration of the  CEA-852 device. 
Depending  on  the configuration method of the  L-IP one can either input the configuration 
data  in  this  menu  and  the  L-IP  then  contacts  the  configuration  server  or  the  preferred 
method  is  to enter the information at the configuration server and the configuration server 
then contacts the device (L-IP) and fills in the relevant information in this menu. The device 
configuration menu is shown in Figure 35.  

CEA-852 Device Configuration Menu 
================================= 
 
[2]  Config server address    : <unset> 
[3]  Config server port       : 1629 (default) 
[4]  Config client port       : 1628 (default) 
[5]  Device name              : 
     Channel mode             : Standard 
     Pri. SNTP server         : <unset> 
     Sec. SNTP server         : <unset> 
     Channel timeout          : off 
[6]  Escrow timeout           : on (64 ms) 
[7]  Aggregation timeout      : on (16 ms) 
[8]  MD5 authentication       : off 
[9]  MD5 secret               : not displayed 
[0]  Location string          : unknown 
[a]  NAT address              : Auto (no NAT) 
[b]  Multicast address        : <unset> 
[r]  Re-register at CS 
 
[q]  Quit without saving 
[x]  Exit and save 
 
Please choose: 

Figure 35: CEA-852 device configuration menu. 

Содержание L-IP














































































































































































Отзывы:

Нет отзывов