L-IP User Manual
17
LOYTEC
Version 6.1
LOYTEC electronics GmbH
Figure 3: New Ethernet 2 (WAN) tab
WLAN Interface
In combination with the external LWLAN-800 interface, the device provides new interface
tabs for wireless IP networks. Similar to the second Ethernet interface, one can choose
which protocols are available on the wireless network. The wireless interface can be
configured as a WLAN client, access point or mesh node. Using the latter, a wireless mesh
network of LOYTEC devices can be built. Please refer to Section 6.2.7 to learn more about
the WLAN interface.
SNMP
For accessing vital operational data in standard IT equipment, L-IP series “C” devices offer
an SNMP management base (MIB). All system registers are available in that MIB. The
MIB file can be downloaded from the device and imported in the SNMP management tool.
For more information on configuring and using SNMP with a LOYTEC device please refer
to Section 10.1.
OPC Server
The L-IP series “C” devices are equipped with an OPC server, which can speak the well-
known OPC XML-DA and OPC UA protocols. The OPC server is used for perfect
integration with the LWEB-900 building management software for device maintenance.
Wireshark Packet Capture
The L-IP series “C” models have the Wireshark packet capture feature. Using this feature
local packet logs can be made and stored on the L-IP. It is also possible to connect a
running Wireshark protocol analyzer on the PC to the L-IP and run a life packet capture.
For more information on how to set up packet capture, please refer to Section 13.9.