L-INX/L-GATE User Manual
54
LOYTEC
LOYTEC electronics GmbH
7.
After the scan has completed, the folder
LNS Database Scan
is populated with the found
NVs as shown in Figure 32.
Figure 32: Result of an NV scan in LNS.
8.
Select the scanned NVs for use in the gateway and click on the button
Use on Device
in the tool bar.
9.
The data points are created as dynamic NVs under the
Datapoints
folder of the
CEA-709 Port
folder.
10.
Select the NVs under the port folder, which shall be mapped to BACnet. Click on the
speed button
Generate and connect selected
in the tool bar.
11.
The generated BACnet objects appear in the
Datapoints
folder under the
BACnet Port
folder as shown in Figure 32. These objects are also automatically connected to the
respective NVs.
Figure 33: Auto-created BACnet Points in the BACnet Folder
12.
Then download the configuration into the device by clicking the
Download
Configuration
speed button.
13.
After the reboot of the device value changes in the NVs are propagated to the connected
BACnet objects and vice versa.