Loxit Limited, First Avenue, Poynton Industrial Estate, Poynton, Cheshire, UK. SK12 1YJ
www.loxit.com ꞁ [email protected] ꞁ +44(0)1625 856 801
WARNING
This equipment is not a toy.
Children must be under surveillance to ensure that they do not play with this piece of electrical
equipment.
The product is shipped fully assembled, if the unit is being stored do not double stack.
Ensure that all casters are released from their brakes and are running freely when being moved.
This unit is not designed for rough terrain.
Please treat sympathetically avoiding kerbs or changes in level and being especially careful when
changing floor surfaces or crossing sloping areas. Take your time. If in doubt ask a second person
to assist you.
Maintenance Instructions
There are no user maintenance or adjustment points on this machine. Simply clean dust and dirt
from the outside of the unit and inspect for damage or breaks.
Cleaners and disinfectants must not be highly alkaline or acidic.
The user should visually check the equipment for signs of wear or misuse before each time of
using and for the security of the screen or any accessories.
The condition of electrical cables and plugs should be checked for wear or abrasion before use.
In addition, the equipment should be visually inspected in more detail every three months to
ensure that the unit is functioning properly and if it is not the user should report this to the
manufacturer for advice or for the return of the unit to base for repair.
Incidences of misuse must be reported immediately and the unit placed out of commission.
All repairs to the unit must only be carried out by Loxit.
The warranty is only valid in so far as the equipment has been used and maintained correctly
and has not been tampered with.
Violent treatment will invalidate the warranty.
During operation if the unit makes any unusual noises or smells turn off the power supply at the
mains immediately.
Ambient temperature range +5deg C to +40 deg C.
Safety
Before Charging Please Check:
1. The wall socket is switched on
2. The RESET button on the RCD is pushed in
3. The red neon indicator switch on the power strip is switched on and lit if applicable, or the rocker
switch in the case of ChargeConnect products.
4. The IEC lead is plugged into the IEC inlet and the IEC Inlet switch is turned on with the neon indicator
light illuminated.
5. The low voltage power leads are firmly connected to the power source (device transformer or
ChargeConnect) and the device.
Lapbank TL products must be connected to an RCD protected earthed mains supply when charging.